Depending on the size and shape of your products, it might be necessary to adjust the arrangement of the product compartments in your machine. This way you make sure products are dispensed properly and don't get stuck.
What you needA bit of finesse
Unplug it before you start.
Unlock the lock with the key
Open the door all the way
Each drawer is secured with clamps on the right and left
Flip both clamps up as shown in the picture
Carefully pull out the drawer
At the stop it tilts down slightly – this makes filling it easier
Each divider is fixed with two clips on the underside of the drawer
Push the front clip towards the back wall of the machine
Pull the rear clip towards you
After that you can remove the divider
Pull the transparent pin out of the spiral
Move the spiral and motor to the left or right, depending on where you want it
Put the pin back in → if needed, wiggle the spiral a bit until a hole fits
Let the clips snap back in
Order doesn't matter: adjust all spirals first and then insert the dividers – or put the matching divider back after each spiral right away
Done:
You've now adjusted the layout of the product compartments.
A separate guide on combining product compartments for double spirals is coming soon.
