Scope of delivery
Included in the scope of delivery:
Roof
2 mounting rails
Screws
Step 1: Loosen screws on the vending machine
There are silver screws on the roof of the vending machine.
Loosen two screws on the left and right each.
Use the holes of the mounting rail as a guide to remove the correct screws.
Step 2: Attach mounting rails
Attach the two mounting rails to the roof of the vending machine using the screws you took out before.
Make sure the rails slant to the back – this way, the front side of the roof is higher than the back.
Step 3: Mount the roof
Place the roof on the rails.
Secure it with the included screws.
There are holes on both the sides and back to connect the roof to the mounting rails.
Done: The roof is now stable and properly mounted on the machine.
